Skip NavigationView Sitemap

Network

Power over Ethernet (PoE)

A distributed measurement and control system can only work properly if the underlying medium, such as Ethernet, provides fast and reliable communication services. All our measurement instruments are equipped with RJ45 connectors and are fully compatible with the Ethernet network standard IEEE 802.3, which is used in most laboratories, factories and office buildings. The Power over Ethernet IEEE 802.3af (PoE) standard is also widely used. It allows powering connected devices and delivers up to 15.4 W of power (at least 44 V and 350 mA). The newer IEEE 802.3bt Type 4 (PoE++) standard delivers even up to 100 W power (at least 52 V and 960 mA). Therefore, only a single cable needs to be connected to the network device to enable communication and power supply.

Network Infrastructure

Appropriate PoE-compatible network switches, such as the TP Link 8-Port Layer 2 PoE Fast Ethernet Switch, can be used to power silicon systems devices. Up to four PoE devices can be connected to the switch. This means that no special power supplies need to be used to power the individual devices. Installation, in particular in difficult to access locations such as ceilings or walls, is greatly simplified.
We also offer a variety of suitable Cat6a Ethernet patch cords with varying in length from 1 to 10 m. The fully molded cables with 50μm gold plated RJ45 connector contacts ensure excellent signal integrity and high communication reliability in Gigabit Ethernet networks.

1m Cat6a Patch Cord

Cat6a patch cords are manufactured for highest data rates and best electromagnetic shielding. Fully moulded in design they feature 50μ gold RJ45 pins and 26 AWG stranded copper conductors.

Features

  • Designed to give quality assured, fault-free data/voice transmission with high speed networks
  • UL approved cable
  • 26 AWG stranded copper conductor
  • Pin 1 to 1 wiring configuration
  • 50μ gold RJ45 pins
  • Length: 1m
  • Color: black

3m Cat6a Patch Cord

Cat6a patch cords are manufactured for highest data rates and best electromagnetic shielding. Fully moulded in design they feature 50μ gold RJ45 pins and 26 AWG stranded copper conductors.

Features

  • Designed to give quality assured, fault-free data/voice transmission with high speed networks
  • UL approved cable
  • 26 AWG stranded copper conductor
  • Pin 1 to 1 wiring configuration
  • 50μ gold RJ45 pins
  • Length: 3m
  • Color: black

5m Cat6a Patch Cord

Cat6a patch cords are manufactured for highest data rates and best electromagnetic shielding. Fully moulded in design they feature 50μ gold RJ45 pins and 26 AWG stranded copper conductors.

Features

  • Designed to give quality assured, fault-free data/voice transmission with high speed networks
  • UL approved cable
  • 26 AWG stranded copper conductor
  • Pin 1 to 1 wiring configuration
  • 50μ gold RJ45 pins
  • Length: 5m
  • Color: black

10m Cat6a Patch Cord

Cat6a patch cords are manufactured for highest data rates and best electromagnetic shielding. Fully moulded in design they feature 50μ gold RJ45 pins and 26 AWG stranded copper conductors.

Features

  • Designed to give quality assured, fault-free data/voice transmission with high speed networks
  • UL approved cable
  • 26 AWG stranded copper conductor
  • Pin 1 to 1 wiring configuration
  • 50μ gold RJ45 pins
  • Length: 10m
  • Color: black

TP Link 8-Port Layer2 PoE Fast Ethernet Switch

The TP Link TL-SF1008P is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets. This enables straight-forward installation of devices such as wireless access points, IP Cameras or IP Phones.

Features

  • Supports PoE power up to 15.4 W for each PoE port
  • Supports PoE power up to 53 W for all PoE ports
  • Supports PoE IEEE 802.3af compliant PDs
  • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
  • 1K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging
  • LED indicators for monitoring power, link, activity and speed
  • External power adapter supply
silicon systems seifert gmbh - Logo
Back to top